Skip to content

Spatially averaged reverberation time (Grid)

On this diagram, the averaged reverberation times T30, T20, T10 or EDT for the grid are shown depending on frequency.

The averaged reverberation times are determined from the echograms at all grid points. Therefore, the particle model is required (see Configuration). In addition, the option „Calculate Echograms and Decay Curves ... for Grid“ on the „RIA-evaluation“ tab has to be activated (see "RIR-Evaluation" tab).

Dialog options

Additional settings and descriptions of the menus, see Spatially averaged reverberation time (Receivers + grid).